|
|
 |
|
|
|
|
Tractor Implements
The implements we have are shown below. To view them in action, via before and after photos, check out the 'Projects' section of the 'Property' category. |
(2-11-00)
The new 5' Rhino power mower. The way this mower cuts is absolutely incredible! |
(2-11-00)
The new 3-point post hole digger with a 9 inch auger. This implement is used to drill holes in the ground to set 4 and 6 inch diameter fence posts. The old yellow bar (to the left) is part of the 3-point hitch system for the back of the tractor. |
(2-11-00)
The 7-foot wide, 3-point hitch back blade that came with the tractor. We use this for keeping the dirt driveway and area between the house and garage smooth. |
(2-11-00)
The 7-foot wide tilling disc. We use this implement to turn, or till, the soil wherever it is dragged. Each of the two rows of discs has a pivot point in the center that determines how agressive the soil is tilled. It's 3-point mounting to the tractor allows the depth of till to be set. For example, the front row of discs could be set to go deep and aggressive, while the back row is set higher and less aggressive to smooth out the soil tilled by the first row. A 'modern' tilling disc used for planting crops is probably 20 or 30 feet wide with 8 or 10 rows of discs, so this is just a baby (smile). |
|